基于多肽识别的电化学生物传感技术

多肽具有分子量小、易于合成、生物兼容性好、稳定性高及序列灵活多样等优点。因此,多肽作为新型生物识别元件,已被广泛应用于生物传感器的构建。电化学分析灵敏度高、准确度好、设备简单、检测范围广且易于操作。本文介绍了基于多肽识别的电化学生物传感器技术,包括多肽的修饰与固定化、多肽与待测物的识别及检测原理;综述了近五年多肽电化学生物传感器对重金属离子、小分子、蛋白质、细菌和病毒的检测;展望了肽基电化学生物传感器的发展趋势。     

Evaluation of Poly(glycidyl methacrylate)-Coated Column for Enantioseparation with Azithromycin Lactobionate and Clindamycin Phosphate as Chiral Selectors in Capillary Electrophoresis

Chromatographia - In this study, a poly(glycidyl methacrylate) nanoparticle (PGMA NP)-coated column system with two antibiotics as selector was constructed for enantioseparation. The PGMA NP...     

Direct immobilization of iodine-loaded silver-coated silica gel with silicate glass powders at low temperature

Journal of Radioanalytical and Nuclear Chemistry - To long-term immobilization of secondary iodine-waste, iodine loaded silver-coated silica-gel (AgIs), glass-powder was used to directly solidify...     

通过"双离子键"固载于季鏻盐聚合物的[Rh(CO)I3]2–物种在多相乙醇羰基化中的应用

贵金属物种(Rh或Ir络合物)在均相羰基化和氢甲酰化催化过程得到了广泛的应用,但始终存在分离繁琐等问题,其均相多相化可很大程度上简化分离操作,故一直广受重视.单位点催化剂因其具有可与均相相比拟的较高金属利用率和选择性而成为均相多相化的重要研究方向之一.研究发现,在碘物种存在的情况下用于固载金属物种的配位键容易断裂,进而导致金属物种的流失,而通过离子键固载的[Rh(CO)₂I₂]^–物种更加稳定,比如著名的甲醇羰基化“Acetica^TM”工艺中,[Rh(CO)₂I₂]^–负一价阴离子物种是以离子键的方式固定在带有阳离子骨架的甲基化聚乙烯吡啶树脂上.与甲醇羰基化过程类似的乙醇羰基化过程是生产重要化工中间体丙酸的主要途径之一,但该过程的均相多相化始终存在着稳定性差这一关键问题.为了解决这一问题,基于之前将固载于季鏻盐聚合物的[Rh(CO)I₃]^2–应用于甲醇羰基化的工作,我们将类似的季鏻盐聚合物固载Rh基催化剂Rh-TPISP用于多相乙醇羰基化过程,通过多种表征进一步证明了Rh物种和P物种结构,并提出了“双离子键”模型.P的K边XANES证明了聚合物TPISP的季鏻化阳离子骨架特征.HAADF-STEM测试表明Rh-TPISP中的Rh呈现单位点分散的状态.Rh的XPS和XANES结果证明了Rh-TPISP中Rh物种的价态介于0~+1.通过EXAFS的拟合解析给出了[Rh(CO)I₃]^2–活性中心结构.由于[Rh(CO)₂I₂]^–为经典的羰基化活性中心,为了进一步证明该结构的正确性,我们将Rh-TPISP的EXAFS和IR谱图与标样[PPh3Et]⁺[Rh(CO)₂I₂]^–对比发现:在EXAFS谱图中,Rh-TPISP中的Rh-C峰高低于[PPh3Et]+[Rh(CO)₂I₂]^–的Rh-C峰高,而Rh-TPISP中的Rh-I峰高高于[PPh3Et]+[Rh(CO)₂I₂]^–的Rh-I峰高,这就说明Rh-TPISP中Rh物种的Rh-C配位数小于2,而Rh-I配位数大于2;在IR谱图中,标样[PPh3Et]+[Rh(CO)₂I₂]^–中有两个羰基振动峰,与该物种的两个Rh-C配位键相符,而Rh-TPISP中的只有一个羰基振动峰,说明Rh-C配位数为1.因此,Rh-TPISP催化剂的季鏻盐骨架中的每个P物种带有一个正电荷,每个带有两个负电荷的[Rh(CO)I₃]^2–通过与两个[P]⁺的静电作用进行固载,形成“双离子键”结构.该催化剂在固定床乙醇羰基化过程中表现出优异的羰基化活性、选择性和稳定性.在3.5 MPa、195 oC反应近1000 h后,Rh-TPISP催化剂TOF保持在约350 h–1,丙酰基选择性为95%以上,高出所有文献报道的均相和多相乙醇羰基化活性.其较高的活性主要是因为[Rh(CO)I₃]^2–比传统Rh活性相[Rh(CO)₂I₂]^–具有更强的富电子性,而较高的稳定性主要是由于“双离子键”这种强静电作用比“AceticaTM”工艺中“单离子键”更有利于Rh物种的固载.故Rh-TPISP催化剂中的“双离子键”对其优异的催化性能具有极其重要的作用,对后续多相乙醇羰基化的发展具有重要意义.     

Comparison of the Structural Evolution of β Polypropylene during the Sequential and Simultaneous Biaxial Stretching Process

In this work, the lamellar structural evolution and microvoids variations of β polypropylene(β-PP) during the processing of two different stretching methods, sequential biaxial stretching and simultaneous biaxial stretching, were investigated in detail. It was found that different stretching methods led to significantly different lamellae deformation modes, and the microporous membranes obtained from the simultaneous biaxial stretching exhibited better mechanical properties. For the sequential biaxial stretching, abundant coarse fibers originated from the tight accumulation of the lamellae parallel to the longitudinal stretching direction, whereas the lamellae perpendicular to the stretching direction were easily deformed and separated. Those coarse fibers were difficult to be separated to form micropores during the subsequent transverse stretching process, resulting in a poor micropores distribution. However, for the simultaneous biaxial stretching, the β crystal had the same deformation mode, that is, the lamellae distributed in different directions were all destroyed, forming abundant microvoids and little coarse fibers.     

Thermal behaviors and kinetic analysis of two natural kaolinite samples selected from Qingshuihe region in Inner Mongolia in China

Journal of Thermal Analysis and Calorimetry - The thermal characteristic behaviors of two kaolinite samples selected from Qingshuihe region in Inner Mongolia in China were studied through...     

Study on backward-facing step flow and heat transfer characteristics of hybrid nanofluids

Journal of Thermal Analysis and Calorimetry - As high heat dissipation has increasingly become the primary factor restricting the capability of electronic elements, and the high temperature of the...     

Rapid Preparation of Mesoporous Methylsilsesquioxane Aerogels by Microwave Heating Technology

Microwave heating technology is known as an alternative to traditional gas and electric heating sources. In this work, mesoporous methylsilsesquioxane (MSQ) aerogels were prepared via a sol–gel process accompanied by microwave heating technology, and microwave heating was used in the gelation of sol and the drying of wet gels, respectively. The effects of hexadecyltrimethylammonium chloride (CTAC) as a surfactant and template, hydrochloric acid (HCl) as a catalyst, ethanol as a solvent, sodium hydroxide (NaOH) as a gelation agent, and microwave power on the pore structure of as-prepared MSQ aerogels were investigated in detail. Microwave heating at low power results in the acceleration of sol–gel transition and achieves the gelation within a few minutes. Appropriate amounts of chemical reagents and microwave heating at high power allow the preparation of mesoporous MSQ aerogels with a BET-specific surface area of 681.6 m²·g⁻¹ and a mesopore size of 19 nm, and the resultant MSQ aerogel still has a BET specific surface area as high as 134 m²·g⁻¹ after heat treatment at 600 °C for 2 h, showing high thermal stability. The MSQ aerogels/fibre composite possesses a low thermal conductivity of 0.039 W/(m·k)⁻¹, displaying good thermal insulation. Microwave heating technology is a promising heating method for the preparation of other aerogels.     

Novel TEMPO-oxidized cellulose nanofiber/polyvinyl alcohol/polyethyleneimine nanoparticles for Cu2+ removal in water

Cellulose - In this study, environmentally friendly TEMPO-oxidized cellulose nanofiber (TO-CNF)/polyvinyl alcohol (PVA)/polyethyleneimine (PEI) nanoparticles were obtained by assembling PEI into...     

小分子给体/高分子受体型有机太阳能电池研究进展

有机太阳能电池具有低成本、柔性和质量轻等优势, 是一种有应用前景的光伏技术, 受到人们的广泛关注. 有机太阳能电池的光敏活性层通常由p-型有机半导体(包括小分子和高分子)与n-型有机半导体(包括小分子和高分子)共混而成. 小分子给体/高分子受体型有机太阳能电池具有形貌热稳定性优异的特点, 值得深入研究. 本综述旨在总结小分子给体/高分子受体型有机太阳能电池的研究进展, 分别介绍了基于酰亚胺基、氰基和含硼氮配位键(B←N)的高分子受体的活性层材料体系的发展状况. 在器件性能方面, 通过分子设计、相分离形貌调控, 改善了小分子给体/高分子受体的匹配性, 将该类电池的能量转换效率从最初的0.29%提升至目前的9.51%, 为性能的进一步提升总结了经验; 在稳定性方面, 基于该体系形貌热稳定性优异的特点, 开发出高温耐受型有机太阳能电池器件. 最后, 展望了小分子给体/高分子受体型有机太阳能电池的未来发展方向和前景.